Welcome, Guest
Please Login or Register.    Lost Password?

Problem with Cash Register connected on serialport
(1 viewing) (1) Guest
Go to bottomPage: 1
TOPIC: Problem with Cash Register connected on serialport
#2836
Problem with Cash Register connected on serialport 8 Years, 9 Months ago Karma: 0
I have ECR (Eletronic Cahs Register) connected on serial port COM7. Everything is working well in local mode, but it is not working via GoGlobal publishing. I am trying to install some Serial Port Monitors and it shows that port is opened, and I see on ECRs display, that there is somthing heapend - text on display is changed, but nothing else. It's look like ECR receved some data, but is unable to send back, or maybe something else. PLEASE give me some advice ... anything!

Regards.

PS. This is Serial Port Monitor screenshot:

COM port is opened
In/out queue size 512/512
Baud rate 9600
RTS on
DTR on
Data bits=8, Stop bits=2, Parity=None
Set chars: Eof=0x00, Error=0x00, Break=0x00, Event=0x00, Xon=0x11, Xoff=0x13
Handflow: ControlHandShake=(DTR_CONTROL), FlowReplace=(TRANSMIT_TOGGLE, RTS_CONTROL), XonLimit=2048, XoffLimit=512
Set timeouts: ReadInterval=-1, ReadTotalTimeoutMultiplier=0, ReadTotalTimeoutConstant=0, WriteTotalTimeoutMultiplier=0, WriteTotalTimeoutConstant=0
<STX>T;:<ETX>
<ACK>
onlineng
Fresh Boarder
Posts: 5
graphgraph
User Offline Click here to see the profile of this user
The administrator has disabled public write access.
 
Go to topPage: 1
Moderators: troy, Andyl