Welcome, Guest
Please Login or Register.    Lost Password?

How do I increase the APS log level in GGW?
(1 viewing) (1) Guest
Go to bottomPage: 1
TOPIC: How do I increase the APS log level in GGW?
How do I increase the APS log level in GGW? 14 Years, 11 Months ago Karma: 6
GO-Global for Windows offers six log output levels, as follows:

0: No output
1: Errors
2: Errors and Events
3: Errors, Events and Warnings
4: Errors, Events, Warnings and Diagnostic Messages
5, 6: Errors, Events, Warnings, Diagnostic Messages and Trace Messages

For general purpose diagnostics, you do not need to set the output level higher than level 4. Level 5 or higher produce a lot of output and should not be utilized unless you are instructed to do so by our support staff. Setting the log output value to 4, 5, or 6 may adversely affect GO-Global performance. The default value for the Output level is 1. The default location for the log files is at

\Program Files\GraphOn\GO-Global Server\Log

If you are using GGW version 3.1 or later, use the following steps to increase the output level:

1. From the Cluster Manager, click Tools | Server Options
2. Click Log
3. Type one of the above numeric values in the Output level box

Restart the GO-Global Application Publishing Service.

Remember to set your verbose level back to 1 to avoid your log growing too large!
Posts: 591
User Offline Click here to see the profile of this user
Last Edit: 2008/08/13 15:17 By Erikt.
The administrator has disabled public write access.
Go to topPage: 1
Moderators: troy, Andyl