I have a product license code. I was told by the Sales that the product license code shall be good for two single user. As I have two servers with the same hostname/hostid and even IP, could you please tell me how I shall apply the license file through the web for licensing both servers?
I got the hostid at /opt/graphon/etc/ and the hostname from the command of "uname -a". It's it the right riectory getting host ID? and right way to get host name? In fact, I got exactly the same hostname/hostid from both server.
I really got confused how I shall apply for the license?
Please also check attached both servers' info.


Current LAN Configuration:

MAC Address : 0x0015600905c6

DHCP Status : Disabled

IP Address : 172.24.12.20

MP Host Name : ndserver

Subnet Mask : 255.255.255.0

Gateway Address : 172.24.12.20

Link State : Auto Negotiate

Web Console Port Number : 2023

SSH Access Port Number : - (MP Feature Not Licensed)

IPMI / LAN Port Number : 623


NDSERVER:/#UNAME     ua name -a
HP-UX NDSERVER B.11.11 U 9000/800 2113728031 unlimited-user license



NDSERVER:/#cat /opt/graphon/etc/hostid, .txt
lmhostid - Copyright (c) 1989-2003 by Macrovision Corporation. All rights reserved.
The FLEXlm host ID of this machine is "7dfcee1e"


Current LAN Configuration:

MAC Address : 0x001560091531

DHCP Status : Disabled

IP Address : 172.16.12.11

MP Host Name : ndserver

Subnet Mask : 255.255.255.0

Gateway Address : 172.16.12.254

Link State : Auto Negotiate

Web Console Port Number : 2023

SSH Access Port Number : - (MP Feature Not Licensed)

IPMI / LAN Port Number : 623


NDSERVER:/#uname -a
HP-UX NDSERVER B.11.11 U 9000/800 2113728030 unlimited-user license




NDSERVER:/#cat /opt/graphon/etc/hostid.txt
lmhostid - Copyright (c) 1989-2003 by Macrovision Corporation. All rights reserved.
The FLEXlm host ID of this machine is "7dfcee1e"